TASKI Sani Acid - Heavy duty washroom descaler
Description
Heavy duty limescale remover for acid resistant hard surfaces.
Key properties
• TASKI Sani Acid is a concentrated Phosphoric acid based cleaner
• TASKI Sani Acid contains a corrosion inhibitor
• TASKI Sani Acid quickly removes calcium/limescale deposits as well as urine deposits and rust stains from acid resistant surfaces
Benefits
• Concentrated Phosphoric acid based cleaner to efficiently remove heavy
residues
• Gentle to the surfaces to be descaled
• Effective on a wide variety of acid soluble deposits and stains
Use instructions/Dosage:
Light to medium deposits: 100ml-500ml for 10l solution (1-5% /
1:100-1:20).
Heavy deposits: Increase concentration up to 20%
Application:
Manual:
1. Dose product into a bucket filled with water.
2. Apply the solution on the surface, allow the solution to act briefly and
scrub the surface.
3. Thoroughly rinse the surface with water and wipe dry. Spot treat
stubborn deposits with an appropriate pad.
Machine:
1. Dose the product into a full water tank of a single disc machine.
2. Apply the solution, scrub the floor and allow sufficient contact time.
3. Scrub a second time and directly wet vacuum the soiled solution.
4. Rinse the floor thoroughly with clean water.
Important:
Do not mix the solution with chlorinated products. Do not use on acid sensitive
surfaces, e.g marble, terrazzo, travertine and other calcareous surfaces. Test
acid resistance before use. When descaling, sufficiently pre wet grouts with
water. Immediately remove solution from acid sensitive surfaces and rinse
thoroughly. Thoroughly rinse chrome washroom fittings to prevent from
damaging.
Technical data
Appearance: Clear colourless liquid
Relative density (20°C): 1.21
pH value neat: 0.4 – 0.9
pH value in use: 1.9 +/- 0.5 at 1% dilution
The above data is typical of normal production and should not be taken as a specification.
Safe handling and storage information
Safe handling:
Full guidance on the handling and disposal of this product is provided in a separate Material Safety Data Sheet.
For professional users/specialists only.
Storage Information:
Store in original closed containers away from extremes of temperature.
Product compatibility
Do not mix the solution with chlorinated products. Do not use on acid sensitive surfaces, e.g. marble, terrazzo,
travertine and other calcareous surfaces.
Courtesy :
SUMIT MANWAL
Description
Heavy duty limescale remover for acid resistant hard surfaces.
Key properties
• TASKI Sani Acid is a concentrated Phosphoric acid based cleaner
• TASKI Sani Acid contains a corrosion inhibitor
• TASKI Sani Acid quickly removes calcium/limescale deposits as well as urine deposits and rust stains from acid resistant surfaces
Benefits
• Concentrated Phosphoric acid based cleaner to efficiently remove heavy
residues
• Gentle to the surfaces to be descaled
• Effective on a wide variety of acid soluble deposits and stains
Use instructions/Dosage:
Light to medium deposits: 100ml-500ml for 10l solution (1-5% /
1:100-1:20).
Heavy deposits: Increase concentration up to 20%
Application:
Manual:
1. Dose product into a bucket filled with water.
2. Apply the solution on the surface, allow the solution to act briefly and
scrub the surface.
3. Thoroughly rinse the surface with water and wipe dry. Spot treat
stubborn deposits with an appropriate pad.
Machine:
1. Dose the product into a full water tank of a single disc machine.
2. Apply the solution, scrub the floor and allow sufficient contact time.
3. Scrub a second time and directly wet vacuum the soiled solution.
4. Rinse the floor thoroughly with clean water.
Important:
Do not mix the solution with chlorinated products. Do not use on acid sensitive
surfaces, e.g marble, terrazzo, travertine and other calcareous surfaces. Test
acid resistance before use. When descaling, sufficiently pre wet grouts with
water. Immediately remove solution from acid sensitive surfaces and rinse
thoroughly. Thoroughly rinse chrome washroom fittings to prevent from
damaging.
Technical data
Appearance: Clear colourless liquid
Relative density (20°C): 1.21
pH value neat: 0.4 – 0.9
pH value in use: 1.9 +/- 0.5 at 1% dilution
The above data is typical of normal production and should not be taken as a specification.
Safe handling and storage information
Safe handling:
Full guidance on the handling and disposal of this product is provided in a separate Material Safety Data Sheet.
For professional users/specialists only.
Storage Information:
Store in original closed containers away from extremes of temperature.
Product compatibility
Do not mix the solution with chlorinated products. Do not use on acid sensitive surfaces, e.g. marble, terrazzo,
travertine and other calcareous surfaces.
Courtesy :
SUMIT MANWAL